Escort TD-150BLE

Escort TD-150BLE Fuel Level Sensor


A time-tested sensor in a new housing with the ability to configure and transmit data using Bluetooth Low Energy (BLE) technology

«Escort TD-150 BLE» is a high-precision capacitive fuel level sensor (FLS), which is used to monitor fuel consumption, refueling, draining and theft on all types of vehicles, as well as stationary tanks.


Advantages of the TD-150 BLE sensor

  • In addition to digital, frequency and analog output signals, BLE mode has been added to this sensor.
  • Has OExiallBT6X explosion protection certificate, CE and E-Mark certificate, Customs Union certificate, GOST-R certificate of conformity, Measuring instruments certificate.
  • Now it is possible to configure and receive data through a mobile application.
  • New housing.

An additional protective casing made of glass-filled polyamide provides an even greater degree of resistance to external mechanical influences and discrediting of the system.

Other advantages

  • The measuring part of the sensor can be easily adapted to any depth of the tank.
  • The fuel monitoring sensor is easy to set up and perfectly interacts with monitoring systems of any manufacturers.
  • Galvanic isolation throughout the sensor housing.
  • Control of connector opening and/or cable breakage.
  • Extended analog signal range from 0.2 to 9 V
  • Operating temperature range from -60/+85 °C

* The sensor does not have a built-in power supply

DATASHEET

Power supply voltage 7 … 80 V*¹
Current, no more 30 mA
Measurement error in the effective range up to 1%
Operating modes digital, frequency, analog
Digital mode: wired
– interface
– communications protocol
– data communication rate
– output signal range LLS
RS-485
LLS
19200
bps 0 … 4095 un.
Digital mode: wireless (for execution TD.150012.000-01**)
– interface
– the communication protocol
Bluetooth LE (BLE)**
Escort BLE**
Frequency mode:
– output signal range
300 … 4395 Hz
Analog mode:
– output signal range
0,2 … 9 V*²
The sensitivity of the receiver / transmitter power -96 dBm** / 4 dBm**
Operating frequency range (BLE) from 2,402 to 2,480 GHz**
Ingress protection rating in accordance with GOST 14254 IP69S
Electric shock protection in accordance with GOST 12.2.007.0 class III
Type of explosion protection intrinsically safe electrical circuit (“ia” level of protection)
Explosion proof mark OEx ia IIB T6 X
Categories of explosive mixtures according to GOST R IEC 60079-20-1-2011 categories IIA, IIB
Explosion hazardous areas according to GOST IEC 60079-10-1-2011 0; 1 and 2
Operating conditions:
– ambient temperature
– extreme ambient temperature
– air pressure
– 45 … + 50 °С
– 60 … + 85 °С
84 … 106,7 kPa
Dimensions, no more mm 80х80х(L+21), where L is the sensor length in mm
Nominal sensor length indicated on the label (pasted in the Certificate)
Weight, no more kg 0,35 + 0,4хL, where L – the sensor length in meters

*1 – to comply with the certificate of conformity №ТС RU C-RU.МЮ62.В.00110/18 №0574797 the supply voltage must not exceed 40V.
*2 when connecting resistors to the supply circuit, the output signal range may differ significantly.
** – It is used for execution TD.150012.000-01.

Similar products

All products